Leituo is a brand owned by Hangzhou leituo Industrial Co., Ltd. Founded in 2009, leituo brand is a formal high-tech brand with sliding door and overall wardrobe as its main research and development objects. Since the establishment of the brand, the management policy of improving the quality as the main line, optimizing the overall quality of the enterprise and seeking development in meeting the needs of the society has been based on scientific and technological innovation, leituo brand continuously introduces advanced sliding door production equipment and production technology to form a professional technology research and development team. Overcome technical difficulties and refresh the patent record of sliding door industries.
Advantages of sliding door
1. Use of sliding door: kitchen partition, balcony partition, sliding wardrobe door, toilet partition, etc.; Frame material: titanium alloy material; Color: black walnut, teak, porcelain white, champagne, quicksand Gold, quicksand silver, sand aluminum, etc. The following Wuhan sliding door factory will introduce the use and advantages of sliding doors.
2. Advantages of sliding door: good-looking, practical and environmentally friendly; Quality: pulley is the core of the whole product and the part with the highest technical content. The precision is upper Pulley. The same imported ball is a bearing, there is only a gap of less than 1mm between the upper rail and the two walls of the Rail, which fully ensures the sliding balance of door body; Return pulley adopts imported ball bearing and glass fiber material, and the single return pulley bearing is up to 80 kilograms, glass fiber is enough to ensure sliding door sliding and pulling more than 100000 times! The maximum size can be 2.8 m * 1.5 m;
3. Its frame material is made of titanium alloy, and its surface treatment is made of high-temperature oxidation fluorocarbon, which can not change color for ten years; Glass anti-joint strip is installed at the joint of glass door panel and metal frame, this can ensure that the glass will not deform or burst due to long-term collision; Now built-in pulleys are used, so the lap joint of the two doors is only 3-3.5mm, plus the unique dust excluder, the sealing effect can achieve the best effect and absolutely prevent dust intrusion!
4. Since most sliding doors are directly installed on the wall, the secondary inch requirements for installing sliding door openings are very standard. The angle between the wall and the ground is 90 degrees, however, there will be gaps in actual construction, but the error between the upper and lower sides and the left and right sides should not exceed 5mm as far as possible. The small error can be adjusted by a height adjustment device of return pulley, make the door completely consistent with the wall without leaving gaps!
In the knowledge mentioned in the above article, we can also recognize leituo sliding door as a first-line brand.
